Step One: Get Your Cleaning Materials and Chemicals
Oddly, the very first product you need is a basic one; A pail. A five-gallon container would work nicely. If you do not have one you can get one from your regional hardware store or retail giant. Then you require some bleach. This can be through a liquid or a powder cleaner. (There is also solutions such as Basic Green's House and Siding Cleaner offered at home enhancement shops.) Finally, you need a scrubby of sorts. A sponge with a rough side will work perfectly. It might not be wise to utilize a steel wool pad as that can take the paint totally off your garage door. You can also utilize a semi-soft brush with a deal with, which might be a little much easier. Likewise, be sure to use a set of gloves, either leather or latex.
Step Two: Preparation Work
When you have all of your garage door cleaning materials, fill the (5 gallon) container up halfway and put those gloves on. Then gather about half a cup of bleach. That may seem like a percentage but it is important not to exaggerate it with the bleach. Obviously, if you are not comfortable utilizing bleach, there are a few substitutes. Dish soap will work, simply not also. Multi-purpose cleaner (without bleach) also works, however again, not too.
Step 3: Ready Set Tidy!
Now you are prepared to clean that garage door! Make certain you get every panel and every crack and crevice. It is usually much better to do the top first and work your method over from one side to the other. Then you can do the exact same thing for the bottom. Make sure to put some effort into it and get any spots of mold or mildew off. As soon as the garage door is completely scrubbed down, you can rinse it off with the tube or just by filling up the container a few times. As always, if you have any garage door cleaning tips questions or see you need some garage door repair services, just call a Los Angeles garage door repair expert!